Entrance armored door, made of two painted and varnished MDF panels with a thickness of 10 mm, whose coating is four layers of paint and one layer of varnish.
 
The construction of the wing consists of two painted and varnished MDF panels with a thickness of 10 mm, the coating of which is made of four layers of paint and one layer of varnish. With a filling for noise and heat insulation of mineral wool, with additional metal ribbing. The thickness of the wing is 70 mm. On the side of the adjustable hinges, the wing is reinforced with six passive spikes, which when the door is closed enter the frame.
The frame is adjustable, with sills on both sides. It is made of 1.5 mm powder-coated metal. The door has a factory-installed rubber seal along the frame, with a metal “L-shaped” profile on the threshold, also with a rubber seal, which helps to provide better insulation and easier construction of the threshold.
The overall dimensions of the leaf with the frame can be 900/2000 mm, covering walls up to 340 mm.
The door is equipped with two independent locking systems, each with three active bolts. It is also equipped with six passive bolts that enter the frame when the leaf is closed.
The set includes: 
- sash; - adjustable frame;
- rubber seal for the frame;
- three non-adjustable hinges;
- six anti-burglary spikes;
- metal L-shaped profile;
- two independent locking systems;
- two secret locks: main and additional;
- two secret cartridges;
- anti-shatter cap and cartridge armoring;
- a spyglass with a metal hammer.